Pioneer AVIC-F700BT Operation Manual page 129

Chapter
D
(Using the radio
(FM)
You can listen to the radio by using the naviga-
tion system. This section describes operations
for radio (FM).
• Touch [FM] on the "AV Source" menu to
display the "FM" screen.
~
For details concerning operations, refer to
Screen switching oveNiew on page 18.
Reading the screen
@""';;;;;;;;;';;;;;;;;;;;;I
® -.;;;==..:.
CD
Source icon
Shows which source has been selected.
®
Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
®
Preset number indicator
Shows what preset item has been selected.
@) Frequency indicator
®
LOCAL indicator
Shows when local seek tuning is on.
®
STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
(J) Signal level indicator~
(100)
En
)
Using the touch panel keys
CD
Recalls equalizer curves
:>
For details, refer to Recalling equalizer
curves on page 140.
®
Displaying the "Function" menu
:>
For details, refer to Using the
"Function
/l menu on the next page.
®
Select a preset channel
[...] or
[~]
can be used to switch preset chan-
nels.
@) Perform manual tuning
To perform manual tuning, touch [...] or [~]
briefly. The frequencies move up ordown one
step at a ti me.
Perform seek tuning
To perform seek tuning, keep touching [...] or
[~]
for about one second and release. The
tu ner wi II scan the frequencies until a broad-
cast strong enough for good reception is
found.
o
You can cancel seek tuning by touching
either [...] or
[~]
briefly.
o
If you keep touching [...] or
[~],
you can
skip broadcasting frequencies. Seek
tuning will start as soon as you release
the keys.
o
Moving
MULTI-CONTROL
left or right
enables you to perform the equivalent
operations.
®
Select an FM band
Touch
[Band]
repeatedly until the desired FM
band is displayed,
FM1, FM2
or
FM3.
o
This function is convenient for preparing
different preset lists for each band.
®
Displaying the map screen