Automatic Operation; Mode Control Button; Driver Temperature Control Up/Down Button - Chrysler 2016 Town & Country Owner's Manual

Hide thumbs Also See for 2016 Town & Country:

Table of Contents

460 UNDERSTANDING YOUR INSTRUMENT PANEL

Push and release to select between Modes (Panel, Bi-

Level, Floor, Mix). Performing this function will cause the

ATC to switch into manual mode.

18. Recirculation Control Button

Push and release to change the current setting, the

indicator illuminates when ON.

19. SYNC Button

Push and release to control the temperature setting for all

three zones from the driver temperature control.

Provides the driver with independent temperature con-

trol. Push the top button for warmer temperatures or the

lower button for cooler temperature settings.

Automatic Temperature Control (ATC)

Automatic Operation

1. Push the AUTO button on the front ATC Panel and the

words Front Auto will illuminate in the front ATC

display, along with two temperatures for the driver

and front passenger. The system will then automati-

cally regulate the amount of airflow.

2. Next, adjust the temperature you would like the

system to maintain, by adjusting the driver, passenger,

and rear temperatures. Once the desired temperature

is displayed, the system will achieve and automati-

cally maintain that comfort level.

3. When the system is set up for your comfort level, it is

not necessary to change the settings. You will experi-

ence the greatest efficiency by simply allowing the

system to function automatically.

I n f o r ma t i o n P r o v i d e d b y :