Totally Integrated Power Module (Fuses) - Chrysler 2016 Town & Country Owner's Manual

Hide thumbs Also See for 2016 Town & Country:

Table of Contents

• When replacing a blown fuse, always use an appro-

priate replacement fuse with the same amp rating as

the original fuse. Never replace a fuse with another

fuse of higher amp rating. Never replace a blown

fuse with metal wires or any other material. Failure

to use proper fuses may result in serious personal

injury, fire and/or property damage.

• Before replacing a fuse, make sure that the ignition

is off and that all the other services are switched off

and/or disengaged.

• If the replaced fuse blows again, contact an autho-

rized dealer.

WARNING! (Continued)

• If a general protection fuse for safety systems (air

bag system, braking system), power unit systems

(engine system, gearbox system) or steering system

blows, contact an authorized dealer.

Totally Integrated Power Module (Fuses)

The Totally Integrated Power Module is located in the

engine compartment near the battery. Refer to the appli-

cable "Engine Compartment" illustration in this section.

This center contains cartridge fuses and mini-fuses. A

label that identifies each component may be printed or

embossed on the inside of the cover.

I n f o r ma t i o n P r o v i d e d b y :

MAINTAINING YOUR VEHICLE 657