Table of Contents
Advertisement
502 STARTING AND OPERATING
during application, greater pedal force required to slow
or stop, and potential activation of the "Brake System
Warning Light".
In the event power assist is lost for any reason (i.e.,
repeated brake applications with the engine off) the
brakes will still function. However, the effort required to
brake the vehicle will be much greater than that required
with the power system operating.
ELECTRONIC BRAKE CONTROL SYSTEM
Your vehicle is equipped with an advanced Electronic
Brake Control system (EBC). This system includes Elec-
tronic Brake Force Distribution (EBD), Anti-Lock Brake
System (ABS), Brake Assist System (BAS), Hill Start Assist
(HSA), Traction Control System (TCS), Electronic Stability
Control (ESC), and Electronic Roll Mitigation (ERM).
These systems work together to enhance both vehicle
stability and control in various driving conditions.
Your vehicle may also be equipped with Trailer Sway
Control (TSC).
Electronic Brake Force Distribution (EBD)
This function manages the distribution of the braking
torque between the front and rear axles by limiting
braking pressure to the rear axle. This is done to prevent
overslip of the rear wheels to avoid vehicle instability,
and to prevent the rear axle from entering ABS before the
front axle.
Brake System Warning Light
The red "Brake System Warning Light" will turn on when
the ignition switch is turned to the ON position and may
stay on for as long as four seconds.
If the "Brake System Warning Light" remains on or
comes on while driving, it indicates that the brake system
is not functioning properly and that immediate service is
required. If the "Brake System Warning Light" does not
I n f o r ma t i o n P r o v i d e d b y :
Advertisement
Table of Contents
