Table of Contents
Advertisement
Lap/Shoulder Belt Systems
Frequently Asked Question About Installing Child Restraints With Seat Belts
What is the weight limit (child's weight
+ weight of the child restraint) for using
the Tether Anchor with the seat belt to
attach a forward facing child restraint?
Can the rear-facing child restraint touch
the back of the front passenger seat?
Can the head restraints be removed?
Can the buckle stalk be twisted to
tighten the seat belt against the belt path
of the child restraint?
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117
Weight limit of the
Always use the tether anchor when using the
seat belt to install a forward facing child re-
Child Restraint
straint, up to the recommended weight limit
Yes
Contact between the front passenger seat and
the child restraint is allowed, if the child re-
straint manufacturer also allows contact.
Yes
The 2nd row head restraints on bench and
fixed quad seats are removable. 2nd row
stow 'n go head restraints are not removable.
The 3rd row center head restraint is remov-
Yes
(CINCH), the buckle stalk may be twisted up
to 3 full turns. Do not twist the buckle stalk
in a seating position with an ALR retractor.
I n f o r ma t i o n P r o v i d e d b y :
of the child restraint.
able in all vehicles.
In positions with cinching latch plates
2
Advertisement
Table of Contents
