Download  Print this page

Locking The Osd Menu - Fujitsu E22T-7 LED Operating Manual

Hide thumbs

Advertisement

Operation
Select OSD language
If one of the buttons is being pressed for the first time for the OSD menu, the
selection screen for the language is displayed:
► Press the
or the
► Press the
MENU
After selecting the OSD language for the first time, you can change
it at any time in the OSD.
Performing auto-adjustment of the monitor
► Press the
AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting the input signal (D-SUB/DVI-D/HDMI)
► Press the
INPUT
► Press the
or the
► Press the
MENU
/
button to cancel the process.
This setting window can also be called up when the OSD menu is locked.

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
on the monitor using the ON/OFF switch.
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
22
button to select the required language.
/
button to confirm your entries.
/
button for about 1 second.
/
button to call up the Input select settings window.
button to select the desired monitor connection (VGA, DVI or HDMI).
/
button to confirm your selection or the
MENU
/
button for a few seconds while you switch
AUTO
Fujitsu

Advertisement

loading