Locking The Osd Menu - Fujitsu X23T-1 MHL Operating Manual

Selecting input signal (VGA / MHL/HDMI1 / HDMI2)
► Press the INPUT
► Press the /
connection (VGA, MHL/HDMI1 or HDMI2).
► Press the MENU
AUTO / button to cancel the process.
This setting window can also be called up when the OSD menu is locked.

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the
The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the ECO
The message ECO Mode on or ECO Mode off appears.
If you press the ECO button, the following settings are changed:
• the brightness will be adjusted to an energy-saving level
• the power button LED will illuminate in green
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Fujitsu
button to call up the Input select settings window.
or the INPUT /
/ button to confirm your selection or the
ECO and INPUT
button to switch the ECO operating mode on or off.
button to select the desired monitor
buttons at the same time for a few seconds.
Operation
23