Locking The Osd Menu - Fujitsu P34-9 UE Operating Manual

Function
ACR
Auto Brightness
Lighting Guide
Auto level

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press the
them pressed for approximately 10 seconds.

The message OSD locked / unlocked is displayed.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu
Description
Enable/disable dynamic contrast
This function improves the contrast by automatically controlling the
background lighting in relation to the image being displayed.
This setting can only be configured in Office, Video and Custom application
mode.
As soon as ACR is enabled, Auto brightness is automatically disabled.
Enable/disable automatic control of the brightness
This function is used to automatically control the brightness of the
background lighting using the ambient light sensor.
This setting only appears on models with an ambient light sensor and can
only be enabled in Office, Photo or Custom application mode.
As soon as Auto brightness is enabled, ACR is automatically disabled
Enable/disable advice on workplace lighting
With this function, advice is displayed if the ambient light at the workplace
does not meet the ergonomic recommendations for working at the computer
screen.
This setting only appears on models with a light sensor.
Adjust the signal level
With this function you can automatically set the contrast.
Press the button to run the function.
This setting only appears with an analogue video signal (e.g. VGA).
button and the ON/OFF button at the same time and keep
Operation
37