Eye Level Raiser; Photomicrography And Tv Microscopy - Nikon ECLIPSE E200 MV Series Instruction Manual

Eye Level Raiser

4
The eye level raiser (optional) adjusts the height of
the eyepiece tube according to the eye level of the
user. Install the eye level raiser between the main
body and the eyepiece tube. One eye level raiser is
25 mm high. You can use up to two raisers − this
raises the eyepiece tube by 50 mm. Use a
hexagonal wrench (nominal size 2) for M4 set
screws to install the raisers.

Photomicrography and TV Microscopy

5
The microscopes ECLIPSE E200 MV series and E200LED MV series can be used for
photomicrography and TV microscopy.
For those observations, trinocular eyepiece tube, photomicrographic equipment, TV vertical tube,
and C-mount CCTV camera (optional) are available. Read the manuals provided with these
devices for installation and operating conditions.
Eyepiece tubes and relay lenses come in various types. For details, contact your nearest Nikon
representative.
● Trinocular Eyepiece Tube
Push or pull the optical-path selection lever
to adjust the amount of light sent to the
binocular part and the vertical tube.
The eyepiece tubes for the ECLIPSE Ci and
Ni series or 50i and 80i series can be also used.
● Vertical Tube Adapters
When installing the photomicrographic equipment and TV camera on the vertical tube of the
trinocular eyepiece tube, vertical tube adapters are required in-between. For details, contact
your nearest Nikon representative. Typical combinations are shown below.
• Photomicrographic equipment: Use the TV vertical tube and the photomicrographic vertical
• C-mount CCTV camera:
• Digital still camera:
Chapter 5 Miscellaneous Operations
4 Eye Level Raiser
tube adapter.
Use the TV vertical tube and the direct C-mount adapter.
The relay magnification is 1x.
Use the TV vertical tube and the direct C-mount adapter.
Use the relay lens for the C-mount adapter, as necessary.
25
Eye level raiser
Distribution of light for
trinocular eyepiece tube (example)
5