Technical Specifications - AT&T SB3014 User Manual

Appendix

Technical specifications

Frequency control
Transmit frequency
Channels
Nominal effective
range
Optimal and minimum
distances
Power requirements
Memory
Operation
Talk time (while the wireless mic is in use)
Standby**
* Operating times vary depending on your actual use and the lifespan of the battery.
** The wireless mic is not charging or in use.
DECT 6.0 digital technology
Digital Enhanced Cordless Telecommunications (DECT) 6.0 is a new frequency band
that transmits your voice across multiple channels. This technology provides superior
quality of voice and sound, high protection against wiretapping and better range than
2.4 GHz and 5.8 GHz phone systems, while not interfering with wireless routers.
Operating range
This Conference Speakerphone with Wireless Mics operates within the maximum
power allowed by the Federal Communications Commission (FCC). Even so, the
wireless mics and base unit can communicate over a certain distance — which can
vary with the locations of the base unit and wireless mics, the weather, and the
construction of your home or office.
Full-duplex speakerphones
The full-duplex speakerphones on your base unit and wireless mics allow both ends
of a call to speak and be heard at the same time. Optimal performance is subject to
external factors and individual usage.
Crystal controlled PLL synthesizer
Wireless mic: 1921.536-1928.448 MHz
Base unit: 1921.536-1928.448 MHz
5
Maximum power allowed by FCC and IC. Actual operating range may
vary according to environmental conditions at the time of use.
Optimal distance between the base unit/wireless mic and the
participant: 2 feet
Minimum distance between each wireless mic: 1 foot
Wireless mic: Li-ion Battery Pack; 3.7V; 240mAH rechargeable battery
Base unit adapter: Input: 100-240V AC 50/60Hz
Output: 9V DC @ 2000mA
Phonebook:
50 memory locations; up to 30 digits and 15 characters
Call log:
50 memory locations; up to 16 digits and 15 characters
Operating time*
Up to 8 hours
Up to 70 hours
58