Key Tone; Dial Mode - AT&T SB3014 User Manual

Settings
Conference speakerphone settings

Key tone

The base unit is set to beep with each key press. You can adjust the key tone
volume or turn it off. If the key tone is off, there are no beeps when you
press the keys.
1. Press in idle mode to enter the main menu.
2. Press or
3. Press or
4. Press or
5. Press to save your preference. There is a confirmation tone and the
screen returns to the previous menu.

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the base unit to
make a call.
1. Press in idle mode to enter the main menu.
2. Press or
3. Press or
4. Press or
. The screen shows The screen shows DIAL MODE is touch-tone or
DIAL MODE is pulse. There is a confirmation tone and the screen returns
to the previous menu.
NOTE: You can press
while on a call.
to scroll to Settings, then press
to scroll to Key tone, then press
to sample each key tone (Off, or 1 to 3).
to scroll to Settings, then press
to scroll to Dial mode, then press
to choose Touch-tone or Pulse, then press
There is a confirmation tone and the screen returns
to switch to tone dialing temporarily when using pulse service
.
19
Rename base
>Key tone
.
KEY TONE
Key tone
>Dial mode
.
.
DIAL MODE
>Touch-tone
and the screen returns
