Ringer Tone; Set Date/Time - AT&T SB3014 User Manual

Settings
Conference speakerphone settings

Ringer tone

You can choose one of the 10 ringer tones.
1. Press in idle mode to enter the main menu.
2. Press or
3. Press or
4. Press or
Tone 10).
5. Press to save your preference. There is a confirmation tone and the
screen returns to the previous menu.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.

Set date/time

The date and time display on the base unit in idle mode. Before using the
SB3014, set the date and time, as mentioned below. If you subscribe to
caller ID service, the day, month and time are set automatically with each
incoming call. However, The year must be set so that the day of the week
can be calculated from the caller ID information.
1. Press in idle mode to enter the main menu.
2. Press or
3. Press or
enter the number using the dialing keys.
4. Press or
the number using the dialing keys.
5. Press or
the number using the dialing keys, then press
move on to set the time.
6. Press or
the dialing keys.
7. Press or
using the dialing keys.
8. Press or
to confirm. There is a confirmation tone and the screen returns to
the previous menu.
NOTE: The base unit beeps twice if you enter an invalid number.
to scroll to Ringers, then press
to scroll to Ringer tone, then press
to sample each ringer tone (Tone 1 to
to scroll to Set date/time, then press
to select the month, then press
to select the day, then press
to select the year, then press
to select the hour, then press
to select the minute, then press
to select AM or PM, or press 2 for AM or 7 for PM. Press
.
, or
, or enter
, or enter
to
, or enter the number using
, or enter the number
17
>Ringer volume
Ringer tone
.
RINGER TONE
>Tone 1
.
Ringers
>Set date/time
SET DATE
MM/DD/YY
SET TIME
HH:MM --
