Table of Contents
Advertisement
1. WALL MOUNT INSTALLATION
a.
Make sure all preparation steps are completed.
b.
Determine your ceiling height to see if you need an extension.
ii. Duct cover height = 18-
iii. Minimumheight (duct cover only) = 18-3/4
iv. Maximum height (duct cover only) = 36
v. (OPTIONAL) Extension DC Minimum height = 46-3/4
vi. (OPTIONAL) Extension DC Maximum height =
c.
Determine the location you want to install the range hood.(Fig. 2a)
d.
Prepare back wall frame with cross wood support.
e.
Mount the unit onto wall with mounting screws (not included)
f.
Adjust the duct cover mounting bracket to your desired height.
g.
Use a spirit level to ensure the balance of the hood is true.
h.
(OPTIONAL)
i.
Connect a
j.
Connect the exhaust piping to the outlet of the unit. (Fig. 2b)
k.
Finish off by sealing the connection point with aluminum tape.
l.
Slide the duct cover into the unit and adjust its height. (Fig. 2c)
m. Secure it with the (6) duct cover screws provided. (Fig. 2d)
2. EXTENSION DUCT COVER INSTALLATION
a.
Replace the original inner duct cover piece with the extension.
b.
Determine the desired height to mount the duct cover.
c.
REPEAT
INSTALLATION
i. Hood unit height =
INSTALLATION
(lower) + 18-
INSTALLATION.
7
(upper)
- Quick Links:
- Installation
Hide quick links:
Advertisement
Table of Contents
