Changing The Preset Programmes - Tp4 - Danfoss TP4 User & Installation Instructions Manual

Changing the preset programmes - TP4

GB
a) Press PROG twice to show the
st pre-set time and temperature
(Event ).
b) Use + or – buttons to adjust the
TIME (press and hold to change in
0 min increments).
c) Use s or t buttons to adjust the
TEMPERATURE.
Press PROG to move to next preset
d)
time & temperature (Event ).
e) Repeat steps b, c & d for
programming Events 3, 4, 5 & 6.
6