Setting The Clock & Day - Danfoss TP4 User & Installation Instructions Manual

Setting the Clock & Day
CLOCK
Press PROG to begin programming.
Use + or - to adjust the TIME (press and
hold to change in 0 min increments).
DAY (TP5 only)
Press PROG again.
Use + or - buttons until correct DAY is
shown (MO = Monday, TU = Tuesday, etc)
Press PROG again to accept the settings.
!
Remember - you will have to reset
the time when the clocks change in
Spring and Autumn.
i2 00
i2 00
PM
i2 03
GB
3