Stihl TS 480i Instruction Manual page 34

English
Open the fuel filler cap
1.
2.
Press the cap down with your hand as
far as possible, turn it counterclockwise
(approx. 1/8 turn) and remove it.
Close the fuel filler cap
1.
2.
Fit the cap and turn it until it
N
engages in the bayonet mount.
Press the cap down with your hand
N
and turn it clockwise
(approx. 1/8 turn) until it engages
completely. Check cap for
tightness.
32
Checking the lock of the fuel filler cap
Grip the cap – the cap is closed
N
properly if it cannot be removed and
the markings (arrows) on the cap
and fuel tank are aligned
If the cap can be removed or the
markings do not align, close the cap
again – see sections "Close the fuel filler
cap" and "Checking the lock of the fuel
filler cap".
Change the fuel pickup body every year
The fuel pickup body is equipped with a
magnetic separator.
Drain the fuel tank.
N
Pull the fuel pickup body out of the
N
tank with a hook and disconnect it
from the hose.
Connect a new fuel pickup body to
N
the hose.
Return the fuel pickup body to the
N
tank.
TS 480i, TS 500i