Chapter 34 Ip Static Route Setup; Ip Static Route Setup; Figure 265 Menu 12: Ip Static Route Setup - ZyXEL Communications ZyWall 35 User Manual

This chapter shows you how to configure static routes with your ZyWALL.

34.1 IP Static Route Setup

Enter 12 from the main menu. Select one of the IP static routes as shown next to configure IP
static routes in menu 12.1.
Note: The first two static route entries are for default WAN1 and WAN2 routes and
cannot be modified or deleted. The name of each default static route is left
blank unless you configure a static WAN IP address.
The route name changes from "default" to "-default" after you change the static
WAN IP address to a dynamic WAN IP address, indicating the static route is
inactive.

Figure 265 Menu 12: IP Static Route Setup

1. Reserved
2. Reserved
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
9. ________
10. ________
11. ________
12. ________
13. ________
14. ________
15. ________
Enter selection number:
Now, enter the index number of the static route that you want to configure.

Chapter 34 IP Static Route Setup

C
H A P T E R
IP Static Route Setup
Menu 12 - IP Static Route Setup
16. ________
17. ________
18. ________
19. ________
20. ________
21. ________
22. ________
23. ________
24. ________
25. ________
26. ________
27. ________
28. ________
29. ________
30. ________
ZyWALL 35 User's Guide
31. ________ 46. ________
32. ________ 47. ________
33. ________ 48. ________
34. ________ 49. ________
35. ________ 50. ________
36. ________
37. ________
38. ________
39. ________
40. ________
41. ________
42. ________
43. ________
44. ________
45. ________
3 4
467