Quadra-Fire MTVERNINSAE-MBK Owner's Manual page 37

Installation and operation mt vernon pellet insert advanced energy (ae)
Hide thumbs Also See for MTVERNINSAE-MBK:
Table of Contents

Advertisement

R
5. Cleaning Firepot with Firepot Clean-Out Tool
Frequency:
Softwood Pellets: Weekly or every 5 bags
Hardwood Pellets: Weekly or every 3 bags
Alternate Fuel: Daily or everyr 1 bag
By: Homeowner
a. Be sure the wall control screen says OFF and the
appliance is allowed to cool.
b. It may be necessary to use your fi repot clean-out tool
to chip away material that has built up on the sides of
the fi repot and to push out any clinkers.
• Larger clinkers may have to be removed from the
top of the fi repot.
• If the clinker adheres to the sides of the fi repot, you
will need to manually clean the fi repot.
c. After power is restored, the auto-clean system will
recycle and then clean itself.
d. The firepot floor plate must be fully closed when
fi nished.
Figure 37.1 - Large Clinker
6. Cleaning Heat Exchanger, Drop Tube & Exhaust
Frequency: Monthly or every 1 ton of fuel (aprx. 50
bags).
By: Homeowner
NOTE: There are heavy duty vacuum cleaners specifi cally
designed for solid fuel appliance cleaning.
WARNING! Hopper Fire Risk!
For trouble free use of your pellet appliance you must per-
form cleaning as called for in these instructions. Not doing
so will result in:
• Poor operating performance
• Smoke spillage into the home
• Overheating of components
Not properly cleaning your appliance on a regular basis will
void your warranty.
November 22, 2011
Tools Needed: A Shop Vac and generic micro cleaning
kit; fl at head and Phillips screwdriver; 11/32 Nut-driver or
wrench.
Shop Vac* Example
* Can be purchased at your local hardware store.
a. It is necessary to remove the baffl e to gain access to the
heat exchanger. Follow instructions for baffl e removal
on page 40.
b. Vacuum the ash from the heat exchanger with an
upholstery brush to remove the majority of the ash. Be
sure to vacuum the back of the baffl e also. Inspect the
drop tube and remove any residue build-up in the drop
tube. Figure 37.1.
Figure 37.2 - Example of a dirty heat exchanger
Figure 37.3
7036-135G
Mt. Vernon Pellet Insert (AE)
Micro Cleaning Kit*
Example
Page 37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtverninsae-pmhMtverninsae-cwlMtverninsae-csb

Table of Contents