Changing The Filter - Jura F9 Quick Reference Manual

F9 – Quick Reference Guide

Changing the filter

6
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Press the 'Next'
'Switch open'
T Place a receptacle under the hot-water spout.
l T Turn the switch to the m position.
'Filter is being
spout.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300 ml. 'Switch close'
y T Turn the switch to the ° position.
'Please select product'
now activated.
E After 50 litres of water have flowed through, the filter will
cease to work. Your JURA F9 will automatically prompt you to
change the filter.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
E CLARIS filter cartridges are available from specialised dealers.
Precondition: 'Change the filter'
O T Press the P button.
'Maintenance status'
button.
rinsed', water flows out of the hot-water
appears on the display.
appears on the display. The filter is
is displayed.
('1/7')