dallmeier DMS 240 Operating Instructions Manual page 8

DMS 240 / DMS 160 / DMS 80
Protection against condensation water
If the unit is brought from a cold to a warm environment,
condensation water can form inside the unit. Short-circuits may
then lead to damage to the system. Wait up to 8 hours for the unit
to reach room temperature before starting it up.
Observe the rated voltage
The unit can be damaged or destroyed by the application of an
incorrect voltage.
The mains voltage must always match the rated voltage of the
unit. The rated voltage is specified on the rating plate of the unit.
Observe ratings
Unsuitable ambient conditions and improper installation (mainly
too high ambient temperature and insufficient ventilation) may
reduce the unit's life cycle. Ensure compliance with the stated
operating conditions (see technical data), requirements at the
installation site and, if applicable, maintenance regulations.
Expansion components/peripheral devices
Use only expansion components conforming with the technical data
of the unit. Inappropriate peripheral devices may result in the
violation of local laws and regulations and damages to the unit.
Furthermore, the use of peripheral devices that are not certified by
Dallmeier electronic results in loss of warranty. In case of doubt,
contact the sales partner responsible for your area.
Do not move while in operation
Strong vibrations can cause damage to the unit, in particular to the
hard disk(s). Therefore, do not bump the unit or move it in a jerky
motion while in operation. Instruct the cleaning personnel
accordingly if necessary!
Do not open the unit
Do not open the housing of the unit. There are no components
inside the unit that require maintenance by the user. The inspection,
maintenance and repair with an open housing must only be carried
out by trained and authorized professionals (installer).
8 Dallmeier electronic GmbH & Co.KG