Basic Procedure - dallmeier DMS 240 Operating Instructions Manual

DMS 240 / DMS 160 / DMS 80
8.5.1

Basic procedure

Steps A to D first show the basic course of the search function.
Further settings can be found in the Advanced search options
section.
A) Selecting the search range in the picture
B) Setting the time range
C) Starting a search
44
" Click the Set button.
" Drag a rectangle in the picture by using the mouse.
This rectangle marks the range in the picture in which a search
for picture changes is to be carried out afterwards.
A maximum of four picture ranges can be selected.
Moving the marking
If you click in the center of a marking, you can move it while
keeping the mouse button pressed.
Changing the size
If you position the cursor at the edge of a marking, you can
change its size.
Deleting the marking
In order to delete a marking, just click with the right mouse
button.
The date and time fields next to Start and Stop are used to set
the time frames (time window) for the search. The procedure is
identical to the description in the Advanced search section.
" Click the Search button to start the search process.
The results of the search (hits) are displayed in an event list
(see Fig. 8-9).
The display Hit x/y shows the number of hits found under y and
the number of the hit currently selected under x (see Step D).
Dallmeier electronic GmbH & Co.KG