Changing The Split Type (Fbas Monitor) - dallmeier DMS 240 Operating Instructions Manual

DMS 240 / DMS 160 / DMS 80
Fig. 5-2: Task bar for selecting the split type
5.2

Changing the split type (FBAS Monitor)

To change the displayed split type on the FBAS monitor, please
proceed as follows:
" Move the mouse pointer to the lower edge of the display.
The task bar with the buttons for selecting the split type will be
displayed.
" Move the mouse pointer to the button of the relevant split type.
" Right-click on the button.
Fig. 5-3: Context menu for selecting the FBAS monitor
16
" Left-click on a button to display
NOTE
Please take into account that this function is not
available for split types 4x4c and 5x5.
The context menu for selecting the
FBAS Monitor will be displayed.
" Click on the relevant menu entry
the corresponding split type.
to display the split type on the
FBAS monitor.
Dallmeier electronic GmbH & Co.KG