dallmeier DIS-2/M StreamerPro HDD Large UTP Installation And Configuration Manual
  1. Manuals
  2. Brands
  3. dallmeier Manuals
  4. DVR
  5. DIS-2/M StreamerPro HDD Large UTP
  6. Installation and configuration manual

dallmeier DIS-2/M StreamerPro HDD Large UTP Installation And Configuration Manual

Audio and video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and Configuration
English
Audio and video recorder
DIS-2/M StreamerPro
HDD Large UTP
Rev. 1.1.2 / 090512

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIS-2/M StreamerPro HDD Large UTP and is the answer not in the manual?

Questions and answers

Related Manuals for dallmeier DIS-2/M StreamerPro HDD Large UTP

Summary of Contents for dallmeier DIS-2/M StreamerPro HDD Large UTP

  • Page 1 Installation and Configuration English Audio and video recorder DIS-2/M StreamerPro HDD Large UTP Rev. 1.1.2 / 090512...
  • Page 2 Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third- party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected.

  • Page 3: Table Of Contents

    DIS-2/M StreamerPro HDD Large UTP Table of content About this document .................. 6 Validity ......................6 Documentation on the device ............... 6 Convention ....................6 Safety instructions ..................8 General notes .................... 10 Scope of delivery ..................10 Transportation and packaging ..............10 Appropriate use ...................
  • Page 4 DIS-2/M StreamerPro HDD Large UTP Network settings ..................29 General settings ..................29 Alarm host ....................30 9.2.1 Setting up ....................30 9.2.2 Time control ....................31 9.2.3 Editing and copying ..................35 Video streaming ..................36 9.3.1 Mode ......................36 9.3.2...
  • Page 5 DIS-2/M StreamerPro HDD Large UTP Maintenance ....................63 15.1 Cleaning ...................... 63 15.2 Activation ....................63 Technical data ................... 64 Pin assignment interfaces ............... 65 17.1 Contact IN / OUT ..................65 17.2 UTP / RS485 ....................66 Dallmeier electronic...

  • Page 6: About This Document

    DIS-2/M StreamerPro HDD Large UTP About this document Validity This document applies to the audio and video recorder DIS-2/M StreamerPro HDD large UTP. It has been produced on the basis of version 2.2.1 (software). Documentation on the device Commissioning The document entitled Commissioning contains the most important steps for the connection and commissioning of the device.
  • Page 7 DIS-2/M StreamerPro HDD Large UTP IMPORTANT The word IMPORTANT denotes information for preventing damage, incorrect configurations or incorrect actions. NOTE A NOTE offers information on principles, special features and efficient procedure as well as general recommendations. Expression Expressions in bold and italics generally indicate a control element on the device (switches or labels) or on its user interface (buttons, menu entries).

  • Page 8: Safety Instructions

    Do not make any modifications to the unit (neither to the software nor the hardware) without consulting Dallmeier electronic. Improper modifications can cause malfunctions or damages. Dallmeier electronic accepts no liability for damages resulting from unauthorized or improper modifications to the unit.
  • Page 9 DIS-2/M StreamerPro HDD Large UTP Observe ratings Unsuitable ambient conditions and improper installation (mainly too high ambient temperature and insufficient ventilation) may reduce the unit’s life cycle. Ensure compliance with the stated operating conditions (see technical data), requirements at the installation site and, if applicable, maintenance regulations.

  • Page 10: General Notes

    It enables the quick and simple HDD replacement of a defective or failed HDD (no HotPlug, no HotSwap). The DIS-2/M StreamerPro HDD Large UTP is configured via the network using a PC / Browser. A graphical user interface allows the configuration of all recording and streaming settings.

  • Page 11: Features

    DIS-2/M StreamerPro HDD Large UTP Features The DIS-2/M StreamerPro HDD Large UTP is especially characterised by the following functions and properties: Lockable slide-in cart for hard disk (no HotPlug, no HotSwap) Analogue video inputs CVBS/S-Video/UTP Video compression MPEG-2/-4, MJPEG Audio compression MPEG-1...

  • Page 12: Views And Connection Assignments

    DIS-2/M StreamerPro HDD Large UTP Views and connection assignments Front view Fig. 4-1 HDD carrier Status LEDs (Power, Record, Alarm, Error) Video IN / OUT (CVBS, BNC) Contact IN / OUT LAN interface (RJ45) Audio IN / OUT (3.5 mm phone jack)
  • Page 13 DIS-2/M StreamerPro HDD Large UTP Back view Fans inactive Fig. 4-2 12V (-) 12V (+) 12V DC power supply with inverse-polarity protection Dallmeier electronic...

  • Page 14: Installation And Commissioning

    Danger of death from lightening strike. Do not connect the power supply cable during a thunderstorm. Connect the camera to the DIS-2/M StreamerPro HDD Large UTP using a video cable. Connect the DIS-2/M StreamerPro HDD Large UTP to the network using a network cable.

  • Page 15: Audio And Video Connection

    DIS-2/M StreamerPro HDD Large UTP Audio and video connection The DIS-2/M StreamerPro HDD Large UTP may receive audio and video signals via divers inputs. The following setting must be conducted depending on the utilised interface. Video IN CVBS or S-Video The rotary switch Video has to be set to position 8 or 9.

  • Page 16: Diagram Of Connections For The Utp/Rs485 Interface

    DIS-2/M StreamerPro HDD Large UTP Diagram of connections for the UTP/RS485 interface Rx + Rx - Video (BNC) UTP Audio (+) UTP Audio (-) UTP Video (+) UTP Video (-) Fig. 6-1 Dallmeier electronic...

  • Page 17: Preparing To Configure

    DIS-2/M StreamerPro HDD Large UTP Preparing to configure The DIS-2/M StreamerPro HDD Large UTP will be configured via a PC with web browser in the LAN. System requirements Detail Requirements Desktop PC (IBM compatible) Intel Pentium 1.3 GHz (or higher) AMD Athlon (or equivalent) 1.3 GHz (or higher)
  • Page 18 If the DIS-2/M StreamerPro HDD Large UTP has not yet been configured, use the default address set at the factory (10.2.6.98). Confirm the input. The connection to the DIS-2/M StreamerPro HDD Large UTP will be established. First of all the login page will be displayed. Enter the password.

  • Page 19: Basic Settings

    DIS-2/M StreamerPro HDD Large UTP Basic settings The basic configuration dialogs are centralised under Common settings: Fig. 8-1 Language Open the User interface dialog via Common settings > User interface ..Select the Language tab. Select the required Language. Confirm with OK.

  • Page 20: System Time

    DIS-2/M StreamerPro HDD Large UTP System time The system time can be set manually or be actualised via network. Open the Set time dialog via Common settings > Time ..8.2.1 Manual setting NOTE If a time server was set (see chapter 8.2.2), neither the date nor the time can be set manually.

  • Page 21: Video Standard

    DIS-2/M StreamerPro HDD Large UTP Video standard Open the Video standard dialog via Common settings > Video standard ..Set the Standard. Confirm with OK. Fig. 8-6 COM interface The COM interface can be used as UTP video input or as a serial RS-485 interface.

  • Page 22: Password

    DIS-2/M StreamerPro HDD Large UTP Password Open the Change password dialog via Common settings > Password ..Enter the the active password at Current password. Enter the New password and confirm Finally confirm with OK. Fig. 8-8 IMPORTANT For security reasons the new password should consist of at least 8 characters.

  • Page 23: Fieldcontact Display Filters

    DIS-2/M StreamerPro HDD Large UTP 8.7.1 Fieldcontact display filters First of all decide which field contact data are relevant for the display. Click on Common settings > Fieldcontact display > Filter. Fig. 8-10 If the Enable checkbox is checked, the marked field contact data will be displayed in the track playback.
  • Page 24 DIS-2/M StreamerPro HDD Large UTP A screen will be shown through the blue rectangle background on the right-hand side of the dialog (Dallmeier logo). The white lines represent the stylized playback panel of a typical evaluation station. The white rectangle (with the blue corner) symbolizes the screen area in which the field contact data are displayed.

  • Page 25: Relays

    DIS-2/M StreamerPro HDD Large UTP Relays If the module has a Contact IN / OUT interface, you can configure the Contact OUT relays via the user interface. Click on Common settings > Relays ..Select the appropriate relay. The Relay x dialog will be displayed.

  • Page 26: Motion Detection

    DIS-2/M StreamerPro HDD Large UTP Motion detection The Motion detection function checks whether and how much the contents of two consecutive pictures are different. If the difference satisfies the set criteria, the function assumes a Motion event. This motion event can trigger various functions or actions.
  • Page 27 DIS-2/M StreamerPro HDD Large UTP Level SAD The SAD value defines how great the change in a picture sector must at least be to ensure that it is marked as changed. Major change required Minor change required Sensitivity (slider) The sensitivity is entered as a percentage value. It defines the minimum number of unchanged picture sectors that are required for the complete picture not to be assessed as an event.

  • Page 28: Configuration For Smartfinder

    DIS-2/M StreamerPro HDD Large UTP 8.9.2 Configuration for SmartFinder If SmartFinder is used, some restrictions and additional options must be taken into consideration. Open the Motion detection dialog via Common settings > Motion detection ..Please note the explanations below.

  • Page 29: Network Settings

    The basic network settings are made in the Network settings dialog. NOTE After the network settings have been changed, the connection to the DIS-2/M StreamerPro HDD Large UTP is broken. You then have to log in again. Select Common settings > Network ..

  • Page 30: Alarm Host

    DIS-2/M StreamerPro HDD Large UTP Alarm host If you wish to configure an alarm host, the module can send alarm messages via the LAN. A software package (for example PGuard) to evaluate the messages must be running on the receiving computer.

  • Page 31: Time Control

    DIS-2/M StreamerPro HDD Large UTP track deleted The recording track has been deleted power supply status Notification in the event of a power supply failure You can select one or more notifications by ticking the respective checkbox. If you don’t want to make any additional settings (e.g.
  • Page 32 DIS-2/M StreamerPro HDD Large UTP Fig. 9-9: Alarm hosts calendar function, Week timer tab All areas in the weekly plan which are shown as light colored are active areas (pre-set). This means that within this time area all selected messages will be sent to the corresponding alarm host.
  • Page 33 DIS-2/M StreamerPro HDD Large UTP Exceptions to the weekly plan To account for public holidays and company-specific deviations you can stipulate exceptions to the weekly plan. Open the tab Exceptions (A). Click on New ... (B) Fig. 9-12 Mark the day for which you would like to apply the deviation setting in the displayed calendar.
  • Page 34 DIS-2/M StreamerPro HDD Large UTP Copy exceptions for another date If you want the set exception to apply to other days as well you can copy these settings for a new date. Click on Copy ..Select the new date in the displayed calendar.

  • Page 35: Editing And Copying

    DIS-2/M StreamerPro HDD Large UTP 9.2.3 Editing and copying Editing Open the Alarm hosts dialog for the appropriate alarm host to edit the details. Make the required changes and confirm them by clicking on OK. Copying The Copy function allows you to make a copy of all settings for another alarm host.

  • Page 36: Video Streaming

    DIS-2/M StreamerPro HDD Large UTP Video streaming The module for sending audio and video data can be configured using an IP-based network in the Video Streaming dialog. Open the Video streaming dialog via Common settings > Video streaming ..Before configuration please note the explanations below.

  • Page 37: Multicast / Unicast

    DIS-2/M StreamerPro HDD Large UTP RTP/MP4V-ES The video data are encoded using the MPEG-4 Elementary Stream Standard. The audio data are not taken into consideration, even if the module records with audio locally. The encoder set as the Input must work in encoder mode MPEG-4 (Tracks ... > Encoder settings).

  • Page 38: Range Restriction

    DIS-2/M StreamerPro HDD Large UTP 9.3.3 Range restriction The so-called “Time to Live“ value can be fixed in the TTL box. This value specifies how far a data packet can spread in the network. The TTL is reduced by one by each router through which a packet is routed.

  • Page 39: 10 Recording Settings

    DIS-2/M StreamerPro HDD Large UTP 10 Recording settings If the module is fitted with hard disk drives, in addition to streaming it can also be configured for local recording. For this purpose the encoder which is relevant for recording and streaming must be configured first of all.
  • Page 40 DIS-2/M StreamerPro HDD Large UTP Bitrate The bit rate is a measure of the degree of compression of video data; it thus has a direct impact on the image quality of the recording. A low bit rate stands for a high degree of compression with a relatively small volume of data but poor image quality.

  • Page 41: Track

    DIS-2/M StreamerPro HDD Large UTP Deinterlacing If this function is active, the fields supplied by the camera will be edited. In this case the so- called comb effect, which may occur after merging two fields into a frame, is calculated from the frame.
  • Page 42 DIS-2/M StreamerPro HDD Large UTP The navigation bar will be extended: Fig. 10-3 Open the Track settings dialog via Tracks … > Track 1. Set the relevant encoder for the recording as the Input. Enter the track Name. If necessary, activate the limit on...

  • Page 43: Deleting A Track

    DIS-2/M StreamerPro HDD Large UTP 10.2.2 Deleting a track A track’s definition and recordings can be deleted completely. Open the Track settings dialog via Tracks … > Track name. The relevant track is marked with an active checkbox. Click on Delete.

  • Page 44: Recording

    DIS-2/M StreamerPro HDD Large UTP 10.3 Recording NOTE The record mode is set on a track basis. Click on Recording. To configure the settings for a track, click on the relevant track in the selection list. The Recording settings dialog box will open.

  • Page 45: Contact With Timer

    DIS-2/M StreamerPro HDD Large UTP 10.3.3 Contact with timer When Contact with timer is set, recording is triggered in the same way as under the Contact mode. However, recording will stop after the expiry of a pre-set time - Duration (sec.) box.

  • Page 46: Motion

    DIS-2/M StreamerPro HDD Large UTP 10.3.5 Motion In the Motion recording mode the recording starts if the function determines a motion event (seee chapter 8.9, Motion detection). It is continued up to the expiration of the adjusted time interval (timer).
  • Page 47 DIS-2/M StreamerPro HDD Large UTP Fig. 10-13: Event recording tabat the Recording settings dialog You can decide which events are included in the event recording by checking the appropriate checkboxes. record start If the checkbox for record start is checked, a marker is recorded at every recording start regardless of other settings.

  • Page 48: Use Scheduler

    DIS-2/M StreamerPro HDD Large UTP 10.3.8 Use scheduler In this mode the recording is controlled by the scheduler. Various modes can be set for certain times of day or week for this purpose (see chapter 10.4). The settings for the various modes are made here in the corresponding dialogs (tabs) at the Scheduler dialog.

  • Page 49: Setting Time Limits For Recording Modes

    DIS-2/M StreamerPro HDD Large UTP In the weekly plan you can stipulate the times at which recordings with a particular recording mode are to be made, or stipulate the times at which no recordings are to be made (Recording = not active).
  • Page 50 DIS-2/M StreamerPro HDD Large UTP Canceling the setting In order to cancel part or all of a setting you first have to click on the button for the recording mode you wish to use to overwrite the previous recording mode setting (in the example, Fig.

  • Page 51: Exceptions In The Week Timer

    DIS-2/M StreamerPro HDD Large UTP 10.4.2 Exceptions in the week timer All settings in the week timer apply to the whole year. However, exceptions for public holidays or company-specific requirements can be stipulated as exceptions in the week timer. Open the tab Exceptions.
  • Page 52 DIS-2/M StreamerPro HDD Large UTP Copying an exception setting If the setting is the same for every public holiday, for example, you can copy previously made settings for other days. Click on the Copy ... button. Select the next date in the Calendar which opens.

  • Page 53: Video Settings

    DIS-2/M StreamerPro HDD Large UTP 10.5 Video settings The Video settings dialog allows the way in which the incoming video signal is processed to be adjusted. The settings affect stored and output pictures. Open the Video settings dialog by clicking on Video ….

  • Page 54: 11 Saving The Configuration

    DIS-2/M StreamerPro HDD Large UTP 11 Saving the configuration The configuration of a module can be exported as a file and thus backed up. In addition to re-establishing an individual module, the configuration can also be transfer- red to several modules simultaneously.

  • Page 55: Sending The Configuration File

    DIS-2/M StreamerPro HDD Large UTP 11.2 Sending the configuration file The configuration file saved on the configuration PC can be sent to an individual module. This allows the configuration to be restored on the module that is currently connected. In addition the configuration file can also be sent to several modules at the same time. This is a very effective method of configuring several modules identically in terms of certain configuration groups.
  • Page 56 DIS-2/M StreamerPro HDD Large UTP IMPORTANT Ensure that the Network settings configuration group is not sent to the modules. To send the configuration file, first establish a connection to one of the receiving modules. Log on and open the Config File Management dialog using menu points Config File >...

  • Page 57: 12 Information And Log

    DIS-2/M StreamerPro HDD Large UTP 12 Information and log 12.1 Information dialog General information about the module will be displayed in an information dialog. Open the DIS-2/M UTP StreamerPro dialog via About …. Fig. 12-1 The following will be displayed:...

  • Page 58: 13 Breaking The Connection

    DIS-2/M StreamerPro HDD Large UTP 13 Breaking the connection After completing the configuration you should break the connection in controlled conditions. First log off the system by clicking on Exit. The login page will be displayed again. You can now close the browser as normal.

  • Page 59: 14 Hdd Replacement

    Service case means the replacement of a defective or failed HDD. Please note that a drive may only be replaced by trained personnel who have been authorized to do so by Dallmeier electronic. Contact the Dallmeier Support Team if necessary.

  • Page 60: Replace The Hdd

    DIS-2/M StreamerPro HDD Large UTP 14.2 Replace the HDD CAUTION Risk of data loss and/or damage to the hard disk drive. Ensure that the streamer has disconnected from the power supply before you replace the HDD drawer unit. IMPORTANT Damage to components at risk from electrostatic discharge caused by touching them.
  • Page 61 DIS-2/M StreamerPro HDD Large UTP 4. Secure the HDD drawer unit to the new HDD. IMPORTANT Risk of damage to the HDD drawer unit and/or the streamer. Use only the original screws supplied. Fig. 14-5: Install the new HDD IMPORTANT Risk of damage to the HDD and/or the streamer.
  • Page 62 DIS-2/M StreamerPro HDD Large UTP 5. Insert the HDD drawer unit into the guide rail. 6. Slide the HDD drawer unit carefully into the housing. Lock the HDD drawer unit using the wrench. Fig. 14-7: Close the HDD drawer unit Fig.

  • Page 63: 15 Maintenance

    DIS-2/M StreamerPro HDD Large UTP 15 Maintenance 15.1 Cleaning The system should be installed in an air-conditioned and duct-controlled server room. This means that no cleaning is generally required. If, nevertheless, cleaning is required, wipe the housing (outside) with a dry, anti-static cloth.

  • Page 64: 16 Technical Data

    DIS-2/M StreamerPro HDD Large UTP 16 Technical data Format Video standard PAL / NTSC Video compression MPEG-2 MP@ML MJPEG Audio compression MPEG-1 Layer 2 MP3 (planned) Encoding Frame rate (PAL) 6.25 / 12.5 / 25 fps Frame rate (NTSC) 7.5 / 15 / 30 fps Video bit rate 0.25 - 16 Mbps...

  • Page 65: 17 Pin Assignment Interfaces

    DIS-2/M StreamerPro HDD Large UTP 17 Pin assignment interfaces UTP / RS485 S-Video (mini DIN 4) Video IN / OUT Audio IN / OUT (BNC) (3.5 mm phone jack) LAN (RJ45) Fig. 17-1 Contact IN / OUT 17.1 Contact IN / OUT...

  • Page 66: Utp / Rs485

    DIS-2/M StreamerPro HDD Large UTP 17.2 UTP / RS485 UTP/RS485 connector Connection assignment Function UTP Video (+) UTP Video (-) RS485 (A) UTP Audio (+) UTP Audio (-) RS485 (B) inactive inactive Dallmeier electronic...
  • Page 67 DIS-2/M StreamerPro HDD Large UTP Declaration of conformity This declaration is valid for following product: Equipment: Audio and video recorder Type: DIS-2/M StreamerPro HDD Large UTP Hereby the equipment is confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC) and the Council Directive relating to Low Voltage (2006/95/EEC).

Table of Contents