dallmeier DMS 240 Operating Instructions Manual page 18

DMS 240 / DMS 160 / DMS 80
Sequencer
If the recorder has been configured for alternately displaying various
cameras (sequence), this sequence will run in the single split after
clicking on Sequencer.
Back
The context menu only contains the entry Back if a single split has
been activated by clicking on Expand in a multi split type. Click on
Back to return to the multi split type.
Audio on/off
If the displayed camera has been configured for recording with
audio, the audio output can be turned on (Audio on) and off (Audio
off).
Number/Camera name
All connected cameras are displayed in the camera number/
camera name format. Select a camera by clicking on the
corresponding menu entry. The camera will be shown in the single
split. This action deactivates the sequencer if it was active before.
18
Fig. 5-5: Context menu single split
NOTE
The Expand and Back functions can also be
triggered by double-clicking in the respective split.
Dallmeier electronic GmbH & Co.KG