Connecting Wires To Terminals - Kenwood DDX6023BT Instruction Manual

Connecting Wires to Terminals

Bluetooth Microphone (Accessory 7)
DDX6023BT/DDX6053BT/DDX4023BT/
DDX4053BT/DDX42BT only
Antenna Cord
FM/AM antenna input (JASO)
Accessory 1
Light blue/Yellow
(Steering remote control
wire)
Blue/White
(Power control/antenna
control wire)
Brown
(Mute control wire)
Yellow (Battery wire)
Red (Ignition wire)
Red (A7)
Yellow (A4)
Connector A
Connector B
Pin Colour and functions
A4 Yellow
A5 Blue/White
A6 Orange/White
A7 Red
A8 Black
74
English
Purple/White
(Reverse sensor wire)
Light Green
FUSE ( 10A )
If no connections are made, do not let the cable come out from the tab.
To use the steering wheel remote control feature, you need
an exclusive remote adapter (not supplied) matching your
car is required.
To the power control terminal when using the optional
power amplifier/optional smartphone adapter (KCA-
ML100), or to the antenna control terminal in the vehicle.
☞
(
To the terminal that is grounded when either the telephone
rings or during conversation. (To connect the Kenwood
navigation system, consult your navigation manual.)
Battery
Power Control
Dimmer
Ignition (ACC)
Earth (Ground) Connection
Subwoofer Preout (monaural)
Connect to vehicle's reverse lamp
harness when using the optional
rear view camera.
(Parking sensor wire)
For best safety, be sure to connect
the parking sensor.
⁄
Connect to the vehicle's parking
brake detection switch harness.
page 76)
Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
Red
(Ignition wire)
Unit
Yellow
(Battery wire)
Default wiring
Pin Colour and functions
B1/B2 Purpleª / Purple/Black·
B3/B4 Grayª / Gray/Black·
B5/B6 Whiteª / White/Black·
B7/B8 Greenª / Green/Black·
Extension cable (Accessory 2)
Red (A7)
Vehicle
Yellow (A4)
Rear Speaker (Right)
Front Speaker (Right)
Front Speaker (Left)
Rear Speaker (Left)