Installing/Removing The Unit - Kenwood DDX6023BT Instruction Manual

Installing/Removing the Unit

Installing the Trim Plate
1 Attach accessory 3 to the unit.
Installing the Unit
Bend the tabs of the mounting sleeve
with a screwdriver or similar utensil and
attach it in place.
For more stable attachment the unit (DDX6053BT/
DDX6023BT only)
B
racket
A
ccessory 6
⁄
• Make sure that the unit is installed securely in
place. If the unit is unstable, it may malfunction
(eg, the sound may skip).
Removing the Trim Plate
(DDX4023BT/DDX4053BT/
DDX3023/DDX3053/
DDX42BT/DDX35 only)
1 Engage the catch pins on the extraction
Accessory 3
⁄
• The frame can be removed from the top side in
2 When the lower part is removed, remove
key 4 and remove the two locks on the
lower part. Lower the frame and pull it
forward as shown in the figure.
Accessory 4
Lock
the same manner.
the upper two locations.
Catch
77
English