3Com 3C905-TX User Manual page 25

3 Type at the prompt:
INSTALL [Enter]
Alternatively, at the prompt, type:
AUTOLINK [Enter]
If a caution message appears, indicating a possible problem
with your PCI BIOS, follow the displayed instructions, which
provide a workaround solution. If the workaround does not solve
the problem, contact your computer vendor for a new BIOS.
4 The first time you use the diskette to install an adapter, a
license screen appears. To accept the terms and conditions
of the 3Com end-user software license agreement, type
the following:
Y
To view the full text of the license agreement, press [F1].
Once you have agreed to the terms and conditions of the
3Com license agreement, the license information screen will
not appear again.
The auto installation information screen appears, as shown in
Figure 3-1.
5 Read the screen and press [Enter].
6 When the main menu screen shown in Figure 3-2 appears,
select NetWare DOS ODI Client, and press [Enter].
Auto installation takes a few minutes. Several messages
appear while the AutoLink program is running. A final
message indicating successful installation appears.
Installing NetWare Drivers 3-5