Starting The Group 3 Test - 3Com 3C905-TX User Manual

4-6 C 4: P
HAPTER
Table 4-1 Adapter and Diagnostic Program Names (10 Mbps Adapter Only)
Diagnostic Program Name
3C503
3C505
3C507
3C5X9CFG
3C523
3C523TP
3C527
The diagnostic programs listed above come on the EtherDisk
diskette that accompanied the adapter.
4 From the main menu, select Echo Server Setup.
The program notifies you that your computer is now set up
as an echo server.

Starting the Group 3 Test

To run the Group 3 test on a Fast EtherLink PCI adapter,
follow these steps:
1 Start the Configuration and Diagnostic Program.
This program must be on the computer containing the
adapter you want to test.
2 Select Test Setup from the Test menu.
3 Select Group 3 from the Group Select box.
4 Enable the Group 3 test by highlighting the
<Enable Group> command button.
5 Highlight <OK> and press [Enter].
6 Go to the Run dialog box to start the tests.
T
ERFORMING ROUBLESHOOTING AND
D
IAGNOSTIC
Adapter
â
EtherLink II or II TP
EtherLink II/16 or II/16 TP
â
EtherLink Plus
EtherLink 16 or EtherLink 16 TP
EtherLink III family
EtherLink/MC
EtherLink/MC TP
EtherLink/MC 32
T
ESTS