Id Photo Print - Brother MFC-J3520 User Manual

Hide thumbs Also See for MFC-J3520:
Table of Contents

Advertisement

k
Do one of the following.
Press Print Settings to change
the print settings. (See
PhotoCapture Center™ print
settings on page 59.)
If you do not want to change any
settings, press Start to print.

ID Photo Print

You can select a photo stored in a memory
card or USB Flash drive and print ID photos
for your resume, passport and so on. You can
print four ID photos on one sheet of paper.
NOTE
Just one photo will be printed when you
choose 2x2inch or
50x70mm (2x2.75in) in ID Photo Size,
and 10x15cm in Paper Size.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Press d or c to display
ID Photo Print.
e
Press ID Photo Print.
f
Press d or c to display each photo.
When the photo you want is displayed,
press it.
Printing photos from a memory card or USB Flash drive
g
Press a or b to display 25x36mm,
35x45mm, 36x51mm, 45x45mm,
45x55mm, 35x48mm,
50x70mm (2x2.75in) or 2x2inch,
and then press the option you want to
set as the photo size.
NOTE
The machine automatically crops the
photo according to the size you choose.
8
You cannot trim the photo further.
h
Confirm the image displayed on the
Touchscreen.
Rotate the image if necessary by
pressing
i
Press OK.
j
Do one of the following:
Press Print Settings to change
the print settings. Go to step k.
If you do not want to change any
settings, press Start to print.
.
8
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j3720Mfc-j6520dwMfc-j3720dwMfc-j6720dw

Table of Contents