Setting Your Changes As A New Default - Brother MFC-J3520 User Manual

Chapter 3
NOTE
You can choose four different resolution
settings for monochrome faxes, and two
for colour.
Monochrome
Suitable for most typed
Standard
documents.
Good for small print and
Fine
transmits a little slower than
Standard resolution.
Good for small print or artwork
S.Fine
and transmits slower than
Fine resolution.
Use when the document has
Photo
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Suitable for most typed
Standard
documents.
Use when the document is a
Fine
photograph. The transmission
time is slower than Standard
resolution.
If you choose S.Fine or Photo and then
send a colour fax (choosing Colour in
Colour Setting), the machine will
send the fax using the Fine setting.
12
Setting your changes as a
new default
You can save the settings for the fax options
you use most often by setting them as the
default settings, such as Fax Resolution,
Contrast, Glass Scan Size, Preview,
Real Time TX and Colour Setting.
These settings will remain until you change
them again.
a
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
b
Press Options.
c
Press a or b to choose the menu option
that you want to change. Press your new
option.
Repeat this step for each setting you
want to change.
d
After changing the last setting to your
preferred option, press a or b to display
Set New Default.
e
Press Set New Default.
f
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
g
Press .
3