Setting The Default Paper Size - Brother HL-2230 Service Manual

1.2

Setting the default paper size

<Procedures>
Note :
• The maintenance driver must have been installed. (Refer to
INSTALLING THE MAINTENANCE PRINTER
(1) Open the front cover, and turn the power supply of the printer on while pressing down
the [Go] button. Make sure that the Toner/Drum/Error LED light up.
(2) Release the [Go] button, and then make sure that all LEDs light off.
(3) Press the [Go] button for over 2 seconds, and the Error LED light up. And then the
printer goes into the PIT3 mode.
(4) Connect the printer to PC with USB cable.
(5) Double-click the "FILEDG32.EXE" on PC to start. The following screen appears.
Select the "Brother Maintenance USB Printer".
(6) Drag "DefaultPaperA4.pjl" (A4 size), "DefaultPaperLtr.pjl" (Letter size) or
"DefaultPaperIsr.pjl" (A4 size, Israel font for Israel) and drop it onto the Brother
Maintenance USB Printer icon.
Note :
• The default setting of the new supply main PCB is A4 size.
DRIVER".)
4-3
"APPENDIX 3
Confidential