Manual Time Settings - VTech ErisTerminal VSP600 Administrator And Provisioning Manual

Setting
DST End: Month
DST End: Week
DST End: Day
DST End: Hour
Daylight Savings Offset
Use DHCP (Option
2/100/101)

Manual Time Settings

If Enable Network Time is disabled or if the time server is not available, use Manual Time
Settings to set the current time.
Setting
Date
Time
Click
Using the WebUI
VSP600 Administrator and Provisioning Manual
Description
If User-defined DST is enabled, set the end date and time
for daylight savings: Month, week, day, and hour.
If User-defined DST is enabled, this specifies the daylight
savings adjustment (in minutes) to be applied when the
current time is between Daylight Savings Start and
Daylight Savings End.
If Enable Network Time is selected, select to use DHCP to
determine the time zone offset. Options 2, 100 and 101
determine time zone information.
Description
Select the current year, month, and day. Click the Date
field and select the date from the calendar that appears.
Sets the current hour, minute, and second. Click the Time
field, and enter the current time. You can also refresh the
page to update the manual time settings.
to start the VSP600 using the manual time settings.
56
Back to Contents