Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
VSP600 Administrator and Provisioning Manual
remoteDir.ldap_incall_lookup_enable
Enables or disables LDAP incoming call lookup. If enabled, the VSP600
searches the LDAP directory for the incoming call number. If the number
is found, the VSP600 uses the LDAP entry for CID info.
0 (disabled), 1 (enabled)
remoteDir.ldap_outcall_lookup_enable
Enables or disables LDAP outgoing call lookup. If enabled, numbers
entered in pre-dial or live dial are matched against LDAP entries. If a
match is found, the LDAP entry is displayed for dialing.
0 (disabled), 1 (enabled)
104
Default:
0
Default:
0
Back to Contents