Time And Date Format; Network Time Settings; Time Zone And Daylight Savings Settings - VTech ErisTerminal VSP600 Administrator And Provisioning Manual

Time and Date Format

Click the link for each setting to see the matching configuration file parameter in
""time_date" Module: Time and Date Settings" on page
listed there.
Setting
Date Format
Time Format

Network Time Settings

Setting
Enable Network Time
NTP Server
Use DHCP (Option 42)

Time Zone and Daylight Savings Settings

Setting
Time Zone
Automatically adjust
clock for Daylight
Savings
User-defined DST
DST Start: Month
DST Start: Week
DST Start: Day
DST Start: Hour
Using the WebUI
VSP600 Administrator and Provisioning Manual
Description
Sets the date format.
Sets the clock to a 24-hour or 12-hour format.
Description
Enables or disables getting time and date information for
your phone from the Internet.
If Enable Network Time is selected, enter the URL of your
preferred time server.
If Enable Network Time is selected, select to use DHCP to
locate the time server. Option 42 specifies the NTP server
available to the phone. When enabled, the phone obtains
the time in the following priority:
1. Option 42
2. NTP Server
3. Manual time.
Description
Select your time zone from the list.
Select to adjust the clock for daylight savings time
according to the NTP server and time zone setting. To
disable daylight savings adjustment, disable both this
setting and User-defined Daylight Savings Time.
Select to set your own start and end dates and offset for
Daylight Savings Time. To disable daylight savings
adjustment, disable both this setting and Automatically
adjust clock for Daylight Savings.
If User-defined DST is enabled, set the start date and time
for daylight savings: Month, week, day, and hour.
55
96. Default values and ranges are
Back to Contents