Copy Settings - Primera trio User Manual

7B. Copy Settings
To access copy settings click on the gear icon at the top of the Primera Trio application.
Click on the Copy Settings ribbon. The Copy Settings window will open. Click the Back button to go
back to the main window.
Scan Color Mode. You may choose Color or Gray. Color is the default setting and recommended unless
you would like to reduce the file size of your scanned image/document. Use Gray to create a grayscale
image that uses multiple shades of grey.
Resolution. Higher Resolution will increase quality and increase the time it takes to scan an image.
Lower resolution will decrease the quality and decrease the time it takes to scan an image.
Brightness/Contrast. Enter negative or positive value between ‐100 and 100 or use the slider bar.
Temporary Scan file location. Click Browse to change the temporary location where the scan file will be
located.
Page | 42