Section 8: Battery Installation and Use
The optional lithium‐ion battery can be installed to print or scan without the AC power adapter
connected. Once installed the battery is automatically used any time the AC power cable is
disconnected.
Charging the Battery
The battery automatically charges any time the printer is
connected to AC power or connected to a powered USB cable.
Charge Time AC Power = 1 hour 45 minutes
Charge Time USB (Printer Off) = 10 hours 30 minutes
Installation Instructions
1. Find the battery:
Use only Primera
Battery Part #31033
2. Disconnect AC power and USB.
3. Locate the Battery Cover release latch on the right side near the paper in feed area.
Page | 45