Primera Automated Optical Disc Duplication & Printing System DP-XR Quick Start Manual

7
Connecting the USB 2.0 Cable
Connect the
Publisher to your
computer with
the beige USB
2.0 Cable.
If you are using Windows
If you are using Windows, after a few moments
a found new hardware wizard will appear.
Select "Install the software automatically" and
click Next. Make sure that you have your
installation disc in a drive on your computer.
You may see a notice like the one shown below
stating that the device has not passed Windows
Logo Testing. Click Continue Anyway to
8
Publishing a Disc
Congratulations, you are now ready to start Publishing discs!
•
For Instructions on copying a disc using a PC refer to section 3 in the User's Manual.
•
For Instructions on copying a disc using a Macintosh refer to section 4 in the User's Manual.
•
For help with problems publishing discs using a PC or Macintosh please visit Primera's online
Knowledgebase at www.primera.com/knowledgebase.html
continue installing the printer driver for
your Publisher.
If you are using a MAC
If you are using a MAC you may be required to Add
the printer via the Printer Setup Utility.
1. Open the Printer Setup Utility located in the
Applications - Utilities folder.
2. Click Add. Select the Disc Publisher XR from the
list of available printers. Click Add again.
P/N 510931-100605
TM
AUTOPRINTER
Automated Optical Disc
Duplication & Printing System
© 2005 All rights reserved.
24
*after registering your
product. See
www.primerawarranty.com
for terms and conditions.