6B. Scanner Settings
To access scanner settings click on the gear icon at the top of the Primera Trio application.
The Scanner Settings window will open. Click the back button to go back.
•
Manage Scanner Presets. This opens a new window which allows you to change the default
scanner settings or create and save presets. A preset could be a combination of all the scanner
settings that you prefer for scanning a specific type of image or document.
•
Show scan presets before every scan. When checked this will display the scanner presets every
time you press the Scan button. This will give you the opportunity to change settings before
every scan.
•
Show advanced scan dialog after every scan. When checked this will display the editing
window after each scan. This will allow you to crop, rotate and name the scan file before it is
saved.
•
Calibrate. Click Calibrate to run a scanner calibration. You will need the scanner calibration
card.
•
Clean Scanner. Click to clean the scanner if ink, adhesive or other matter has become lodged in
the scanner slot. You will need scanner cleaning sheets which are available online or at most
office supply stores.
Page | 28