Installing A Road Wheel - Ford TOURNEO CONNECT Owner's Manual

WARNINGS
Set up a warning triangle.
Make sure that your vehicle is on firm,
level ground with the wheels pointing
straight ahead.
Switch the ignition off and apply the
parking brake.
If your vehicle has a manual
transmission, select first or reverse
gear. If it has an automatic
transmission, select park.
Have the passengers leave your
vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Do not work underneath your vehicle
when it is supported only by a jack.
Make sure that the jack is vertical to
the jacking point and the base is flat
on the ground.
Note: The spare wheel is located on the
underside of the rear floor.
1. Install the optional locking lug nut key.
The key is located in the glove box.
Tourneo Connect (C4A) M1 Kombi/N1 Kombi, ET7J-19A321-AKA (CG3606en) enGBR, Edition date: 02/2014
Wheels and Tires
2. Slacken the lug nuts.
3. Jack up your vehicle until the tire is
4. Remove the lug nuts and the wheel.
Note: Do not lay alloy wheels face down
on the ground, this will damage the paint.

Installing a Road Wheel

the National Type Approval invalid. See
Technical Specifications (page 165).
more details about compatibility.
163
clear of the ground.
WARNINGS
Use only approved wheel and tire
sizes. Using other sizes could
damage your vehicle and will make
Do not fit run flat tires on vehicles
that were not originally fitted with
them. See an authorized dealer for
WARNINGS
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.