Installing A Road Wheel - Ford Galaxy Owner's Manual

Installing a road wheel

WARNINGS
Use only approved wheel and tire
sizes. Using other sizes could
damage the vehicle and will make
the National Type Approval invalid. See
Technical Specifications (page 262).
Do not fit run flat tires on vehicles
that were not originally fitted with
them. Please contact your dealer for
more details regarding compatibility.
CAUTION
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
Note: The lug nuts of alloy wheels and
spoked steel wheels can also be used for
the steel spare wheel for a short time
(maximum two weeks).
Note: You can use lug nuts designed for use
with alloy wheels with steel wheels.
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the lug
nuts are against the wheel.
1. Install the wheel.
2. Install the lug nuts finger tight.
Galaxy/S-MAX (CA1) Vehicles Built From: 25-11-2013, Vehicles Built Up To: 18-12-2014, CG3533en enGBR, Edition date: 11/2013, Second Printing
Wheels and Tires
3. Install the locking lug nut key.
4. Partially tighten the lug nuts in the
5. Lower the vehicle and remove the jack.
6. Fully tighten the lug nuts in the
7.
261
sequence shown.
sequence shown. See Technical
Specifications (page 262).
Install the hub cap or cover using the
ball of your hand.