Installing A Road Wheel - Ford TOURNEO COURIER Owner's Manual

WARNINGS
Set up a warning triangle.
Make sure that your vehicle is on firm,
level ground with the wheels pointing
straight ahead.
Switch the ignition off and apply the
parking brake.
If your vehicle has a manual
transmission, select first or reverse
gear. If it has an automatic
transmission, select park.
Have the passengers leave your
vehicle.
Secure the diagonally opposite
wheel with an appropriate block or
wheel chock.
Do not work underneath your vehicle
when it is supported only by a jack.
Make sure that the jack is vertical to
the jacking point and the base is flat
on the ground.
1. Install the optional locking lug nut key.
The key is located in the glove box.
2. Slacken the lug nuts.
Tourneo Courier/Transit Courier (C4A) Vehicles Built From: 19-06-2014, M1 Kombi/M1 Kombi Van/N1 Kombi/N1 Kombi Van/Van, ET7J-19A321-AKB (CG3621en) enGBR, Edition date: 04/2014,
Wheels and Tires
3. Jack up your vehicle until the tire is
4. Remove the lug nuts and the wheel.
Note: Do not lay alloy wheels face down
on the ground, this will damage the paint.

Installing a Road Wheel

the National Type Approval invalid. See
Technical Specifications (page 174).
more details about compatibility.
supplied for your vehicle. If in doubt see an
authorized dealer.
nuts. This can cause the lug nuts to loosen
while driving.
Note: The lug nuts of alloy wheels can also
be used for the steel spare wheel for a short
time (maximum two weeks).
Note: Make sure the wheel and hub contact
surfaces are free from foreign matter.
Note: Make sure that the cones on the lug
nuts are against the wheel.
1.
2. Install the lug nuts finger tight.
173
clear of the ground.
WARNINGS
Use only approved wheel and tire
sizes. Using other sizes could
damage your vehicle and will make
Do not fit run flat tires on vehicles
that were not originally fitted with
them. See an authorized dealer for
WARNINGS
Do not install alloy wheels using lug
nuts designed for use with steel
wheels.
Lug nuts are subject to change. You
must make sure that you use only
the specific lug nuts and wheels
Make sure there is no lubrication
(grease or oil) on the threads or the
surface between the wheel lugs and
Install the wheel.