Installing A Road Wheel - Ford Fiesta Owner's Handbook Manual

WARNINGS
Have the passengers leave the
vehicle.
Secure the diagonally opposite
wheel with an appropriate block
or wheel chock.
Do not work underneath the
vehicle when it is supported only
by a jack.
Make sure that the jack is
vertical to the jacking point and
the base is flat on the ground.
CAUTION
Do not lay alloy wheels face
down on the ground, this will
damage the paint.
1. Insert the flat end of the wheel
brace between the rim and the
hub cover and carefully remove
the hub cap or cover.
E90922
2. Install the locking wheel nut key.
3. Fully extend the wheel brace if
applicable.
Wheels and tyres
130
4. Slacken the wheel nuts.
5. Jack up the vehicle until the tyre
is clear of the ground.
6. Remove the wheel nuts and the
wheel.

Installing a road wheel

WARNINGS
Use only approved wheel and
tyre sizes. Using other sizes
could damage the vehicle and will
make the National Type Approval
invalid. See Technical
specifications (page 138).
Make sure that the arrows on
directional tyres point in the
direction of rotation when the vehicle
is moving forwards. If you have to fit
a spare wheel with the arrows
pointing in the opposite direction,
have the tyre refitted in the correct
direction by a properly trained
technician.
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: Make sure the wheel and hub
contact surfaces are free from
foreign matter.
Note: Make sure that the cones on
the wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.