Ford TOURNEO CONNECT Owner's Manual page 146

WARNINGS
Bulbs become hot when in use. Let
them cool down before you remove
them.
Use the correct specification bulb. See
Bulb Specification Chart (page 147).
The following instructions describe how to
remove the bulbs. Install in the reverse
order unless otherwise stated.
Note: LED lamps are not serviceable. See
an authorized dealer.
Headlamp
A Daytime running lamp and
headlamp high beam
B Headlamp low beam
C Direction indicator
Note: You may have to remove a cover to
gain access to the bulb.
Tourneo Connect (C4A) M1 Kombi/N1 Kombi, ET7J-19A321-AKA (CG3606en) enGBR, Edition date: 02/2014
Maintenance
Direction Indicator
1. Turn the bulb holder counterclockwise
and remove it.
2. Press the bulb in and turn the bulb
counterclockwise to remove it.
Headlamp Low Beam
1. Remove the cover.
2. Release the clip.
3. Remove the bulb holder by pulling it
straight out.
Note: Do not touch the glass of the bulb.
144