Ford TOURNEO CONNECT Owner's Manual page 181

2. Press the OK button to confirm your
selection.
3. Press the MENU button to return.
News Broadcasts
The audio unit may interrupt normal
reception to broadcast news bulletins from
stations on the FM frequency band, radio
data system or other enhanced network
linked stations.
The display will indicate there is an
incoming announcement, during news
broadcasts. When the audio unit interrupts
for a news broadcast the preset volume
level will be the same as traffic
announcements.
Press the MENU button.
Action
1 Audio settings
2 News
1. Turn on or off with the OK button.
2. Press the MENU button to return.
Alternative Frequencies
The majority of programs that broadcast
on the FM frequency band have a program
identification code, it can be recognized by
audio units.
When your vehicle moves from one
transmission area to another with the
alternative frequencies tuning switched
on, this function will search for the
strongest station signal.
Under certain conditions, however,
alternative frequencies tuning may
temporarily disrupt normal reception.
Tourneo Connect (C4A) M1 Kombi/N1 Kombi, ET7J-19A321-AKA (CG3606en) enGBR, Edition date: 02/2014
Audio System
Message
When selected, the unit continually
evaluates signal strength and, if a better
signal becomes available, the unit will
switch to that alternative. It mutes while
it checks a list of alternative frequencies
and if necessary, it will search once across
the selected frequency band for a genuine
alternative frequency.
It will restore radio reception when it finds
one or if one is not found, the unit will
return to the original stored frequency.
When selected, AF may appear in the
display.
Press the MENU button.
Action
1 Audio settings
2 Alt. frequency
1. Turn on or off with the OK button.
2. Press the MENU button to return.
Regional Mode
Regional mode controls the behavior of
alternative frequencies switching between
regionally related networks of a parent
broadcaster. A broadcaster may run a fairly
large network across a large part of the
country. At various times of the day this
large network may be broken down into a
number of smaller regional networks,
typically centered on major towns or cities.
When the network is not split into regional
variants, the whole network caries the
same programming.
Regional mode on: This prevents random
alternative frequency switches when
neighboring regional networks are not
carrying the same programming.
179
Message