Bluetooth Connection; Command Barcodes - Socket CHS 7Mi Quick Start Manual

BLuETOOTH CONNECTION

automatic reconnections
After you power on the CHS, it will automatically try to connect to
the last device it was connected to.
• Make sure the device is in range with Bluetooth On.
• If using HId mode, press the trigger button will enforce the connec-
tion.
• If using iOS mode, make sure the Scanner-enabled Application is
active.
Make sure the device is on and in range. While the CHS is attempting
to connect the Blue LEd will blink every second.
• If a connection is made, the Blue LEd will blink every 3 seconds.
• If a connection is not made after 30 tries, the CHS will emit a long
beep.
16
Scan command barcode(s) to quickly configure the CHS.
Make sure the CHS is not connected to a device before scanning a
command barcode!
for a complete set of command barcodes, download the Command
Barcodes Sheet: www.socketmobile.com/pdf/data-collection/
command-barcodes-sheet-7C.pdf
The web link is also provided in the below Qr Code. To open the web
page, scan this Qr Code using a Qr Code reader App in your iOS device.

COMMANd BArCOdES

17