Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Bosch VDN-498V03-11
Summary of Contents for Bosch VDN-498V03-11
- Page 1 FlexiDome2X VDN-0498 Installation Manual...
-
Page 3: Table Of Contents
Setting up the camera 4.2.1 Camera positioning 4.2.2 Menu navigation 4.2.3 Focal length and focus 4.2.4 Heater 4.2.5 Closing the unit Configuration Menu access 5.1.1 Main menu 5.1.2 Install menu Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 4 5.6.4 Camera ID submenu 5.6.5 Privacy masking submenu 5.6.6 Defaults submenu Troubleshooting Resolving problems Customer service Maintenance Repairs 7.1.1 Transfer and disposal Technical Data Specifications 8.1.1 Dimensions 8.1.2 Accessories Glossary AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 5: Safety
If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the unit. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 6: Important Safety Instructions
10. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment. -
Page 7: Connection In Outdoor Applications
Make the connections inside the water tight compartment. After connections are made ensure that the watertight compartment is tightly closed and cables and conduits are properly sealed to prevent ingress of water. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 8 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that...
-
Page 9: Fcc Information
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 10 (FCC), peut s'avérer utile : How to Identify and Resolve Radio-TV Interference Problems (Comment identifier et résoudre les problèmes d’interférences de radio et de télévision). Cette brochure est disponible auprès du U.S. Government AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 11: Ul Certification
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Bosch notice More information For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 12: Introduction
Wide operating temperature range (-50 to +55 °C / -58 to +131 °F) – Six pre-programmed operation modes – Adaptive dynamic noise reduction – Multiple language on-screen display – Built-in test pattern generator Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 13: Installation
Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes. CAUTION! The camera module is a sensitive device and must be handled carefully. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 14: Disassembly
Figure 3.1 Flush-mount The surface-mount version consists of the following parts: Surface mounting box Camera module and mounting base Inner liner (with sealing ring) Trim ring Dome Figure 3.2 Surface-mount AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 15: Mounting The Unit
– Partially screw in two screws for the keyholes and use them to temporarily hang the camera while the connections are made. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 16: Flush Mounting
Three screws (supplied with camera) Integrated camera unit and base Cables Figure 3.4 Flush mounting - electrical box (4S) Two screws (not supplied) Integrated camera unit and base 4S electrical box AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 17: Surface Mounting
To ensure a watertight cable entry, use round cables of between 5 and 6 mm (0.2 - 0.24 inches) for power and video connection. Note: Use some silicon spray on the cable to help slide the grommets onto it. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 18 Solid surface (three pre-drilled 8mm holes and fit supplied plugs) Three screws (supplied with camera) Three screws (M5, supplied) Integrated camera unit and base Surface mounting box (VDA-455SMB) Cap (remove for side-entry cables) Conduit Cables AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 19: Connection And Set-Up
For an AC supply maintain a consistent wiring polarity in multiple camera systems to help avoid potential camera video rolling. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 20 Push the connections back through the surface cable hole. Secure the mounting base of the camera module to the surface with three screws. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 21: Setting Up The Camera
S1460) is available for making this connection. When the S1460 cable is attached, there is no video available on the BNC connector to avoid interference. Figure 4.1 Camera parts Heater Monitor jack socket Thumbwheels Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 22 Do not rotate more than 340°. – For vertical adjustment along the tilt axis (B), loosen thumbwheels, position camera, then gently tighten thumbwheels to secure camera. Do not rotate more than 90°. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 23: Menu Navigation
– To close all menus at once from any menu, select the Exit item and hold down the menu/select key until the menu display disappears. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 24: Focal Length And Focus
4.2.4 Heater When using the camera at low temperatures, set the heater setting to Auto in the Install menu. The heater turns on at ambient temperatures below 0°C (+32°F). AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 25: Closing The Unit
Place the trim ring over the dome. Align the tamper-resistant screws in the trim ring with the threaded ends in the mounting base. Use the special screwdriver bit supplied to tighten the three tamper-resistant screws. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 26: Configuration
The camera also has an Install menu in which the installation settings can be set. To access the Install menu, press the menu/select button (center) for longer than 1 second. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 27: Pre-Defined Modes
Use this mode if the camera is connected to a purely analog system (e.g. matrix switcher with VCR) or to a CRT monitor. Useful mode for evaluating/demonstrating the camera when it is directly connected to a CRT monitor. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 28: Day/Night Switching
Bilinx communications can only be disabled using the buttons on the camera. Disabled camera buttons When the Bilinx communications link is active, the buttons on the camera are disabled. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 29: Main Menu Structure
Copy active Available Copies current mode settings to the mode mode mode number selected. numbers Default mode Submenu Restores camera to the factory default settings. EXIT Returns to main menu. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 30: Alc Submenu
DVR or IP encoder to compensate for compression methods. Off - The camera output is optimized for connection to an analog system (matrix switcher or monitor. EXIT Returns to main menu. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 31: Shutter/Agc Submenu
Selects the gain setting for Fixed gain operation (0 is no gain). Actual AGC Displays the actual AGC value from the camera to help compare gain level with lighting levels and picture performance. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 32: Day/Night Submenu
A low (negative) value means that the camera switches to monochrome at a lower light level. A high (positive) value means that the camera switches to monochrome at a higher light level. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 33 Off - the color burst in the video signal is (mono) switched Off in monochrome mode. On - the color burst remains active even in monochrome mode (required by some DVRs and IP encoders). EXIT Returns to main menu. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 34: Enhance / Dynamic Engine Submenu
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more detail. Extra sharpness can enhance the details of license plates, facial features and the edges of certain surfaces. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 35: Color Submenu
Slow control loop. Red gain ATW and AWBhold - adjusts the Red gain to -5 to +5 optimize the white point. Manual - -50 to +50 adjusts the Red gain. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 36: Vmd Submenu
VMD alarm. Motion above this level triggers alarm. OSD alarm Text for on-screen display alarm (16 Alphanumeric text characters maximum). EXIT Returns to main menu. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 37 Because of this, it is recommended that you do not connect the VMD-triggered alarm output of the camera to a monitored alarm system as the false-positive alarms may be considered a nuisance. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 38: Install Menu Structure
Adjust the focus as described in Section 4.2.3 Focal length and focus. When finished adjusting, press the Up or Down navigation button to exit the lens wizard and open the Install menu again. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 39: Language Submenu
Select Auto to enable the thermostatically controlled heater function. The heater turns on at approximately 0 °C (+32 °F). Bilinx Comms. On, Off If Off, Bilinx communications is disabled. EXIT Returns to Install menu. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 40: Test Signal Submenu
Test pattern Color bars Select the desired test pattern to help 100%, installation and fault-finding. Grayscale 11- step, Sawtooth 2H, Checker board, Cross hatch, UV plane EXIT Returns to Install menu. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 41: Camera Id Submenu
Display mode Off, Top left, Camera mode is displayed on the screen in Top right, the selected position. Bottom left, Bottom right EXIT Returns to Install menu. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems... -
Page 42: Privacy Masking Submenu
Restores all settings of the six modes to their default (factory) values. Select YES then press the Menu/Select button to restore all values. When completed the message RESTORED! is shown. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 43: Troubleshooting
Customer service If you cannot resolve a fault, please contact your supplier or system integrator, or contact Bosch Security Systems Customer Service directly. The Installer should write down all information regarding the unit so that it can be referenced for warranty or repair. The... -
Page 44: Maintenance
Defective or superfluous devices and parts should be disposed of professionally or taken to your local collection point for hazardous materials. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 45: Technical Data
Dynamic engine XF-Dynamic, 2X-Dynamic, SmartBLC Automatic noise filtering On/Off selectable Sharpness Sharpness enhancement level selectable White Balance ATW, AWBhold and manual (2500 to 10000K) Color Adjustable from monochrome (0%) to 133% color saturation Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 46 24 VDC 330 mA Weight 550 g (1.21 lb) Operating -30 °C to +55 °C (-22 °F to +131 °F) temperature (-50 °C [-58 °F] with heater enabled) Controls OSD with softkey operation AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 47: Dimensions
FlexiDome2X Technical Data | en 8.1.1 Dimensions 57.6 (2.27) 57.6 (2.27) 95 (3.7) 158 (6.22) mm (in) Figure 8.1 Dimensions - Flush-mount Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 48 | Technical Data FlexiDome2X 53.3 (2.1) 53.3 (2.1) 158 (6.22) mm (in) Figure 8.2 Dimensions - Surface-mount AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
-
Page 49: Accessories
Pendant ceiling mount – Corner mount – Bilinx communication interface box and software Contact a Bosch representative in your area for the latest available accessories or visit our website at www.boschsecurity.com Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... -
Page 50: Glossary
The adjustment of the video level to give the desired brightness level. This can be done electronically or by means of an iris control. Auto White Balance (AWB) A feature that allows a color camera to automatically adjust its Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03... - Page 51 The format is quoted in inches, for example 1/3 or 1/2 inch. Color Temperature A measure of the relative color of illumination. Generally used AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
- Page 52 Electronic iris (or AES - Automatic Electronic Shutter) adjusts the camera shutter speed to compensate for lighting changes. In some cases this can eliminate the need for an autoiris lens. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03...
- Page 53 A measurement of video amplitude that divides the area from the bottom of sync to peak white level into 140 equal units - 140 IRE equals 1V peak-to-peak. The range of active video is 100 IRE. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
- Page 54 The measure of the fine detail that can be seen in an image. For analog systems this is typically measured in horizontal Television Lines or TVL. The higher the TVL rating, the higher the resolution. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03...
- Page 55 UTP is the primary wire type for telephone usage and the most commonly used type of networking cable. AR18-08-B010 | v1.0 | 2009.03 Installation Manual Bosch Security Systems...
- Page 56 A scene with both very low and very high illumination levels requires a camera with a wide dynamic range to handle it correctly and produce a useful image. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03...
- Page 58 Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2009...