Set Up Rate Limiting; Use The Prosafe Utility To Set Up Rate Limiting - NETGEAR ProSAFE GSS108E User Manual

5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information screen displays.
6. Select QoS.
7. The QoS Global Configuration screen displays.
8. Select the Port Based radio button.
9. Click the Apply button.
Your settings are saved.

Set Up Rate Limiting

You can limit the rate at which the switch accepts incoming data and the rate that it
retransmits outgoing data. The rate choices vary depending on the switch model.
Rate limiting can be set for a port in addition to other QoS settings. If the port rate limit is set,
the switch restricts the acceptance or retransmission of data to the values configured.

Use the ProSAFE Utility to Set Up Rate Limiting


To set up rate limiting:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection.
2. Double-click the ProSAFE Plus Utility icon.
The configuration home screen displays a list of Plus switches that it discovers on the
local network.
3. Select a switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status screen displays.
ProSAFE 8-Port and 16-Port Gigabit Click Switch
Optimize Performance with Quality of Service
33