Use Browser-Based Access To Control The Switch Leds - NETGEAR ProSAFE GSS108E User Manual

6. Select System > Management > Port LED Control.
7. Select a radio button.
8. Click the APPLY button.
Your settings are saved.

Use Browser-Based Access to Control the Switch LEDs


To control the switch LEDs:
1. Set up your computer to use an IP address in the same subnet as the IP address of the
switch.
2. Use an Ethernet cable to connect your computer to an Ethernet port on the switch.
3. Launch a web browser.
4. In the address field of the browser, enter the IP address of the switch.
You can find the IP address of the switch by using the ProSAFE Plus utility or get it from
the DHCP server. If the switch cannot get an IP address from a DHCP server, enter
192.168.0.239.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information screen displays.
6. Select System > Management >Port LED Control.
7. Select a radio button.
8. Click the APPLY button.
Your settings are saved.
ProSAFE 8-Port and 16-Port Gigabit Click Switch
Manage the Switch
56