Set Up Rate Limiting - NETGEAR ProSAFE GS105Ev2 User Manual

The previous figure is an example. Your switch might provide more or less ports. The
802.1p/DSCP-based radio button is not supported on all models and therefore might not
show on the page.
9. To set the port priority for one or more ports, do the following:
a. Select one or more ports.
b. In the Priority section, select the priority by moving the slider.
c. Click the APPLY button.
Your settings are saved. The same priority is applied to all ports that you selected.
10. To set a different port priority for one or more other ports, repeat

Set Up Rate Limiting

You can limit the rate at which the switch accepts incoming data and the rate that it
retransmits outgoing data. The rate choices vary depending on the switch model.
Rate limiting can be set for a port in addition to other QoS settings. If the port rate limit is set,
the switch restricts the acceptance or retransmission of data to the values configured.
ProSAFE Gigabit Web Managed (Plus) Switches
Optimize Performance With Quality of Service
30
Step 9.