Specify A Port Pvid For An 802.1Q Vlan; Use The Prosafe Plus Utility To Assign A Pvid To A Port - NETGEAR ProSAFE GSS108E User Manual

Hide thumbs Also See for ProSAFE GSS108E:

Table of Contents

The Switch Information screen displays.

Select VLAN > 802.1Q > VLAN Membership.

In the VLAN ID menu, select a VLAN group.

Select the check boxes for the ports you want to add to the VLAN group.

You can use the group operation commands to add all ports or clear the current

selections.

Click the Apply button.

Your settings are saved.

10.

To verify your selections, select VLAN > 802.1Q > Advanced.

The Advanced 802.1Q VLAN screen displays.

Specify a Port PVID for an 802.1Q VLAN

A port default VLAN ID (PVID) is a VLAN ID tag that the switch assigns to data packets it

receives that are not already addressed (tagged) for a particular VLAN group. If you

connected a computer on port 6 and you want it to be a part of VLAN group 2, configure port

6 to automatically add a PVID of 2 to all data received from the computer. This step ensures

that the data from the computer on port 6 can be seen only by other members of VLAN group

You can assign only one PVID to a port.



To assign a PVID to a port:

Connect your computer to the same network as the switch.

You can use a WiFi or wired connection.

Double-click the ProSAFE Plus Utility icon.

The configuration home screen displays a list of Plus switches that it discovers on the

local network.

Select a switch.

If you do not see the switch, click the REFRESH button.

ProSAFE 8-Port and 16-Port Gigabit Click Switch

Use VLANS for Traffic Segmentation

Table of Contents

Prosafe gss116e